1080p 3D HDMI Splitter Extender over Cat5e / cat6 / cat7 Cable 60m/ 196 Feet, Transmitter & Receiver

When you tried to connect DVD/ PS3/ sky HD box to HDMI TV in another room over long distance, you found tricky things: the grainy images and weird color distortion．With DTECH HDMI via Cat5e/ 6/ 7 Extender, you can use 1 single network cable instead of expensive HDMI cable to fix the problems, yet it is quite convenient cabling management and cost-saving.

Click here to get it from Amazon.com!

 

• HDMI Extender over a single Cat6 LAN cable is capable of extending 1080p @60Hz HD video up to 60 meters /196 feet. 
• 2 HDMI output. Splits one HDMI signal into two HDMI displays, for instance make your TV & projector display the same image. 
• The Blu-ray and 3D compatible HDMI to RJ45 converter extender supports 225MHz/ 2.5Gbps bandwidth and assures you the full HD video.  
• Built-in equalizer (EQ) auto-adjusts the optimal image according to the cable length so that assures you clear sharp images.  
• Screen refresh rate at 24Hz / 30Hz / 60 Hz are supported for stable images while most similar products only rated at 24Hz or 30 Hz.
• The compact rugged shielded metal box with anti-slip feet is made to last for your long term use!
• Supports Blu-ray DVD24 / 50 / 60fs / HD-DVD / xvYCC.
• Supports display deep color depth of 24/ 30/ 36 / 48 bit.

Extend HD 1080P Video up to 60m/ 196 feet

The Blu-ray and 3D compatible HDMI Extender over 1 single Cat6 cable is capable of extending 1080p @60Hz video and digital audio 60 meters /196 feet, which will ensure you crystal-clear images at all points of installation, no more fuzzy pictures to upset you!

status.

Not Only Extend, But Also Split

Built with one HDMI loop-out on the transmitter unit, it is also a 2-way HDMI splitter that enables you share one HDMI device to two HDMI displays (a local display via HDMI cable and a remote one via LAN cable without the need for an additional HDMI splitter).

All for Your Convenience

It comes with equalizer (EQ) to auto-adjust the optimal images according to the cable length, providing you clear sharp pictures. The pure hardware design makes it plug-and-play without driver required, plus LED indicator for your checking on work 




Specification:

Transmitter	Input Port	1 x 19 Pin HDMI Female
	Output Port	1 x RJ45, 1 x 19 Pin HDMI Female
Receiver	Input Port	1 x RJ45
	Output Port	1 x 19 Pin HDMI Female
HDCP Compliant	Yes
Bandwidth	225Mhz / 2.5Gbps
Resolution	Up to 1080p
Audio Format	LPCM7.1 / DTS-HD / Dolby-true HD / DTS / DOLBY-AC3 / DSD/ HD(HBR)
Color Depth	24/ 30/ 36 / 48 bit Deep Color
Extended Distance	60m: 1080P@60Hz Over Cat6 Cable;
	35-50m: 1080P@60Hz Over Cat5e Cable.
Housing / Color	Metal Shell / Sliver Grey
Item Dimensions	Transmitter	3.2x 1.8x 0.9 (inch) / 82x 45x 22 (mm)
	Receiver	3.2x 1.8x 0.9 (inch) / 82x 45x 22 (mm)
Item Weight	Transmitter	0.45lb / 206g
	Receiver	0.45lb / 206g

Important Note:

1) When it comes to long cable connection, the standard UTP network Cat5e cable and power adapters are recommended to be used to eliminate bad signals.

2) PC’s default setup is extended mode after a connection between PC and TV, so if you can’t find the PC’s icons on the TV screen, please go to the screen resolution and setup it to be clone mode.

3) If the TV only displays images and is no sound, please confirm if the driver of graphics card is correct, then setup graphics card as PC’s audio output.

Included in Package:

1 x HDMI to RJ45 sender

1 x RJ45 to HDMI receiver

2 x 5V DC Power Supply Adapter

1x User's Manual